AudioZ Exclusive | .ufs | 2.69 GB
Walker是一个全面的，灵活的，易于使用的声音设计工具，提供一切你需要创建真实的脚步和运动的声音。在超过25000个样品的基础上，Walker让你选择3对不同的麦克风(放置在附近和远处)，6种鞋子，14种地面效果和8种衣服的任意组合。执行步骤自动或手动模式与独立控制脚,脚跟和磨损时间创建完美的同步源,并调整音量的衣服,鞋子,擦伤,地板和地面效应和吱吱作响的木头一样,水泥土、树叶和树枝,更需要得到确切的声音。深度，灵活和良好的组织，Walker是一个不可或缺的工具后设施和声音设计师。
深入
Walker的设计从端到端，为专业使用的需求提供严格的质量。在法国巴黎享有盛誉的Technicolor Sound Stage精心录制了超过25,000个样本的大型图书馆，并为精确和可靠的回放进行了编辑。每一种声音的录制使用3对匹配的麦克风，分别放置在近端和远端，在UI中暴露和可选择，包括Schoeps CMC6(小膈心线)，Neumann U87(大膈心线)和DPA 4006(全向)。
Walker利用一个单一的UI编辑器和一个中央HUD预览，显示当前加载的麦克风、鞋子、衣服和地面，而聚焦面板提供控制麦克风、衣服、鞋子、地板、表面效果、步进模式、效果和高级设置。每个编辑器面板提供了许多选项来定制你的声音:
主
选择要监控的麦克风对，调整音量，音高和音高变化(创建自然变化)，共振和动态范围。
步骤
使用“距离”旋钮淡出近位置和远位置的麦克风之间的距离，添加混响，并使“链接”能够随距离动态增加混响量。独立或自动设定步速和灵敏度，控制抬鞋量，利用自动擦鞋滑块增加步速时擦鞋频率。
步模式
在自动和手动模式之间切换，以实现简单的一键式步进周期或手动控制每个步进声音组件，包括;左脚和右脚的脚趾、脚后跟和磨痕。Stair开关禁用后跟声音组件，以模拟上下一段楼梯时的声音。
鞋子
鞋子发出的脚步声。选择6种不同的鞋类型，包括;男士正装鞋，高跟鞋，工作靴，运动鞋，靴子和光脚。选择鞋的吱吱变化，调整步进量，音量变化和音高。
地板上
踏步时地面发出的声音。选择从14个不同的表面，包括;木地板、油毡、瓷砖、混凝土、地毯、木材、泥土、砾石、草地、森林、金属、泥土、沙子和雪。选择可变的地面效果，如木地板吱吱作响，破碎植被和水坑，调整体积，体积变化和沥青。
服装
腿摩擦的声音和织物运动的步骤。从8种材料中选择，包括牛仔裤，棉，皮革，皮革与金属，聚酯，雨衣，合成和粗花呢，并调整音量。
影响
3效果包括一个可变的3波段EQ高和低切割，压缩机和基于ir的混响与控制延迟时间，颜色和混合。
先进的
独立控制左脚和右脚脚趾和脚跟的声音，与链接或离散的增益和pitch设置。
预设
沃克包括一个大的选择现成的预设，以帮助加快您的工作流程。从模板中选择，如Alley -运动鞋，教堂-高跟鞋，吱格的地板-光脚，楼上的邻居-礼服鞋等，然后一旦选择，设置可以根据需要调整，可以保存为离散预设或与你的DAW会话。
一个全面和完全可定制的软件解决方案，创建真实的电影质量的脚步和脚福利，沃克提供了完整的声音定制，智能自动化和卓越的声音质量在一个方便和易于使用的包。
Walker is a comprehensive, flexible and easy to use sound design tool that delivers everything you need to create realistic footstep and movement sounds. Built on a library of over 25,000 samples, Walker lets you choose any combination of 3 different mic pairs (placed near and far), 6 types of shoes, 14 ground surfaces with ground effects and 8 types of clothing. Perform steps in auto or manual modes with independent control over toe, heel and scuff timing to create perfect sync with your source, and adjust the volume of clothing, shoes, scuffing, floor and ground effects like creaking wood, dirt, leaves and branches, water and more to get the exact sound needed. Deep, flexible and well organized, Walker is an indispensable tool for post facilities and sound designers.
In-Depth
Walker was designed from end-to-end to provide an exacting quality for the demands of professional use. A massive library of over 25,000 samples was meticulously recorded at the prestigious Technicolor Sound Stage in Paris, France and edited for precise and reliable playback. Each sound was recorded with 3 matched mic pairs placed near and far, exposed and selectable within the UI, including Schoeps CMC6 (small-diaphragm cardioid), Neumann U87 (large-diaphragm cardioid) and DPA 4006 (omni-directional).
Walker utilizes a single UI editor with a central HUD preview showing the currently loaded mic, shoes, clothing and ground surface, while focused panels provide control over mics, clothing, shoes, floor, surface effects, step mode, effects and advanced settings. Each editor panel provides a number of options for customizing your sound:
Master
Select which mic pair to monitor, adjust the volume, pitch and pitch variance (to create natural variation), resonance and dynamic range.
Steps
Fade between the near and far positioned mics using the Distance knob, add reverb, and enable Link to dynamically increase the reverb amount with distance. Set the step speed and sensitivity independently or automatically, control the volume of shoe lift and utilize the Auto-Scuff slider to increase the frequency of scuffing during steps.
Step Mode
Switch between Automatic and Manual modes for simple one-tap step cycles or manual control over each component of the step sound including; toe, heel and scuff for both the left and right foot independently. A Stair switch disables the heel sound component to simulate the sound of stepping up or down a flight of stairs.
Shoes
The sound of steps made by the shoes. Select from 6 different shoe types including; men’s dress shoes, heels, work boots, trainers, boots and bare feet. Choose shoe squeak variations, adjust step volume, volume variation and pitch.
Floor
The sound of the ground surface made during steps. Select from 14 different surfaces including; wood floor, linoleum, tile, concrete, carpet, wood, dirt, gravel, grass, forest, metal, mud, sand and snow. Choose variable ground effects such as wood floor creaks, crushing vegetation and water puddles, adjust volume, volume variation and pitch.
Clothing
The sounds of legs brushing together and fabric movement during steps. Select from 8 material options including jeans, cotton, leather, leather with metal, polyester, raincoat, synthetic and tweed, and adjust volume.
Effects
3 effects include a variable 3-band EQ with high and low cut, compressor and IR-based reverb with control over delay time, color and mix.
Advanced
Independent control over left and right foot toe and heel sounds, with linked or discrete gain and pitch settings.
Presets
Walker includes a large selection of ready-made presets to help speed-up your workflow. Choose from templates such as Alley – Trainers, Church – High Heels, Creaking Floor – Bare Feet, Upstairs Neighbors – Dress Shoes etc., then once selected, settings can be tuned as needed and can be saved as either discrete presets or with your DAW session.
A comprehensive and fully-customizable software solution for creating realistic cinema-quality footsteps and feet foley, Walker provides complete sound customization, smart-automation and exceptional sound quality in a convenient and easy-to-use package.
