MOCHA | 21 August 2022 | VST3/SAL | 4.99 MB
Swanky Amp Pro 是吉他放大器仿真插件，它基于具有逼真动态的详细电子管模型提供广泛的音色，所有这些都在一个无缝的工作流程中。
获得适合您演奏风格的可录音吉他音色从未如此简单。 Swanky Amp Pro 的独特电路允许深度定制，从干净的复古色调到重度失真。 Swanky Amp Pro 凭借其详细的电子管模拟，为您的演奏增添了一层微妙的活力。
直观的控制，深度定制
通过影响底层电子管模型的直观控制，获得清晰清脆的声音或脆脆的失真。
在一个无缝的工作流程中探索从复古嘎吱声到高增益失真的各种声音。
使用独特的自定义选项打造具有个性的基调。
带脚蹬的踏板效果
通过一系列重要的踏板效果让独奏脱颖而出。
每个踏板都模拟真正的模拟电路：硬削波、软削波、二极管削波，如此多的削波！这些算法经过精心设计，可以捕捉模拟动态。
使用每个踏板的标准化输出电平控制和混音控制来控制您的音色。
详细柜子模型
Swanky Amp 独特的箱体模型技术确保您获得真实而精确的箱体声音。没有室内声学，没有录音伪影。只是纯粹的橱柜。
当您的吉他响亮时，扬声器音盆会动态响应，为您的演奏增添另一层细节。
总是喜欢特定扬声器的声音，但希望它有更多的咬合力？使用独特的扬声器控制来塑造扬声器音盆的声音。这些控件调整扬声器锥体模型，增强其基础频率内容。
简化的增益/驱动/音量控制
通过独立控制前置放大器失真和功率放大器失真，拨入您想要的精确管失真量。
设置输入电平，直到达到您正在使用的拾音器的参考标记。独立驱动前置放大器或功率放大器，而不影响整体音量。然后，只需选择所需的输出电平。
超乎想象的立体声
切换立体声编辑模式并开始编辑参数的立体声传播。
这种简化的工作流程允许您尝试各种立体声配置。更努力地推动右声道，提升左声道的存在感……
箱体部分还提供完全独立的左右声道配置，以及平衡和宽度控制，完全控制立体声场。
技术
获得适合您演奏风格的可录音吉他音色从未如此简单。 Swanky Amp Pro 的独特电路允许深度定制，从干净的复古色调到重度失真。 Swanky Amp Pro 凭借其详细的电子管模拟，为您的演奏增添了一层微妙的活力。
概述
完整的录音就绪吉他信号链
详细的可定制前置放大器模型
具有无缝混合的三色调堆栈模型
具有电压暂降的详细可定制功率放大器模型
插件式噪声门
易于增益分级，具有独立的功放驱动和插入式输出电平
可以直接编辑参数分布的简化立体声工作流程
6个效果踏板
CS-2 风格的压缩器
CE-2 风格的合唱
带频率控制的升压
Tube Screamer 风格的 Overdrive
DS-1 风格的失真
老鼠风格的绒毛
精确的机柜模型，基于详细的模拟
模拟考虑扬声器音盆动力学
用于定制箱体扬声器音盆的独特控件
3 个麦克风和 4 个扬声器锥体可供选择
可使用双红外加载器代替机柜型号
这个版本有什么新东西
版本 1.3.0
当阶段设置为最大值时添加冷偏差。
向安装程序添加了独立版本。
重做所有预设。要更新出厂预设，请按照以下说明进行操作。旧的预设可以在这里找到。
系统要求
Windows 10 或更新版本（旧版本可能有效）
Swanky Amp Pro is guitar amplifier emulation plug-in which offers a broad range of tones based off a detailed tube model with life-like dynamics, all in a seamless workflow.
It’s never been easier to get a recording-ready guitar tone tailored to your playing style. Swanky Amp Pro’s unique circuit allows for deep customization, ranging from clean vintage tones to heavy distortion. Swanky Amp Pro adds a layer of nuanced dynamism to your playing thanks to its detailed tube simulations.
Intuitive controls, deep customization
Get that clear crisp sound or crunchy distortion with intuitive controls that affect the underlying tube model.
Explore sounds ranging from vintage crunch tones to high gain distortion, all in one seamless workflow.
Build a tone with personality using unique customization options.
Pedal effects with a kick
Get that solo to stand out with a collection of essential pedal effects.
Each pedal emulates true analogue circuitry: hard clipping, soft clipping, diode clipping, so much clipping! The algorithms have been crafted to capture analogue dynamics.
Control your tone with standardized output level controls and mix controls for each pedal.
Detailed cabinet model
Swanky Amp’s unique cabinet model technology ensures you get an authentic and precise cabinet sound. No room acoustics, no recording artifacts. Just the pure cabinet.
When your guitar gets loud, the speaker cone responds dynamically, adding another layer of detail to your playing.
Always liked the sound of a particular speaker but wish it had a bit more bite? Use the unique speaker controls to sculpt the sound of the speaker cone. These controls tweak the speaker cone model, enhancing its underlying frequency content.
Simplified gain / drive / volume controls
Dial in the exact amount of tube distortion you want with independent control of the pre-amp distortion and power amp distortion.
Set the input level until you reach the reference mark for the pickup you are using. Drive the pre-amp or the power amp independently, and without affecting the overall volume. Then, simply chose the desired output level.
Bigger-than-life stereo
Toggle the stereo edit mode and start editing the parameter’s stereo spread.
This streamlined workflow allows you to experiment with varied stereo configurations. Drive the right channel a bit harder, boost the presence in the left channel…
The cabinet section also offers fully independent configuration of the left and right channels, along with balance and width controls take full command of the stereo field.
TECHNOLOGY
It’s never been easier to get a recording-ready guitar tone tailored to your playing style. Swanky Amp Pro’s unique circuit allows for deep customization, ranging from clean vintage tones to heavy distortion. Swanky Amp Pro adds a layer of nuanced dynamism to your playing thanks to its detailed tube simulations.
Overview
Full recording-ready guitar signal chain
Detailed customizable pre-amplifier model
Three tone stack models with seamless blending
Detailed customizable power amplifier model with voltage sag
Plug-in-wide noise gate
Easy gain staging, with independent power amplifier drive and plug-in output level
Simplified stereo workflow where the parameter spread can be directly edited
6 effects pedals
Compressor in the style of the CS-2
Chorus in the style of the CE-2
Boost with frequency control
Overdrive in the style of the Tube Screamer
Distortion in the style of the DS-1
Fuzz in the style of the Rat
Precise cabinet model, based off of detailed simulations
Simulation accounts for speaker cone dynamics
Unique controls for customizing the cabinet speaker cone
3 microphones and 4 speaker cones to choose from
Dual IR loader can be used instead of the cabinet model
Whats new in this version
Version 1.3.0
Added a cold bias when stages is set to maximum.
Added a standalone version to the installer.
Reworked all presets. To update the factory presets, follow these instructions. The old presets can be found here.
System Requirements
Windows 10 or newer (older versions might work)
Homepage
